Industrial Sliding Door Double leaves

Max industrial sliding door double leaves is 4400 x 3800 mm, doors are composed of four main parts as following:

1. Door Leaf:

• Leaves made up of two pre-painted hot dip-galvanized steel sheets thickness 0.50mm (Standard), thicker sheets available (on request), Standard sheets color RAL 9010.

2. Door Frame Specs

• Frame is made up from extruded P.V.C profiles reinforced internally by steel and it is thermo–welded at (45^o)

• For negative temperature, a heating cable 40w/m powered at 220v is inserted inside the frame covered by aluminum profile.

3. Threshold Type:

Four types of threshold are available depend on door application and temperature of the room.

S1 frame is only 3 parts without threshold connected to it for positive and negative temperature, heating cable will be inserted inside frame or a special rubber gasket profile.

S2 frame is only 3 parts and a 50mm pre-painted steel angle is connected to the frame at the bottom and recessed into the concrete floor, can be used for both positive and negative temperature.

S3 frame is only 3 parts, A metal angle tube 40 x 40 mm (50 x 50 mm) joined with another stainless steel on aluminum tube (20 x 40 mm) both are connected to the frame at the bottom and recessed into the concrete floor.

A heating cable 40w/m powered at 220v is inserted inside the upper stainless-steel tube which remains visible at the same floor level only for negative temperature.

** Optional: Automatic Sliding system

Industrial Sliding Double leaves models: